Sanirise, Hydrise, Renew and SLF20: your allies for deep cleaning and fabric maintenance. Ease of use and maximum effectiveness.

Flukso presents four new professional products, perfect for fabric sanitization and maintenance: Sanirise, Hydrise, Renew and SLF20. Sanirise is a hydro-alcoholic sanitizing spray solution for surfaces, effective against dirt on which viruses, bacteria and molds can proliferate. Hydrise is a double-action product, sanitizing and water-repellent, with a protective action that resists multiple washing cycles. Renew makes fabric surfaces soft to the touch, facilitating cleaning, restoring brightness and reviving the colors. Finally, SLF20 is a detergent for the deep cleaning of fabric, also effective against stains that may oxidize (tea, coffee, tomato).

Sanirise: the fabric sanitizer against the proliferation of viruses, bacteria, and molds.

Sanirise is a 75% colourless alcohol-based sanitizing product for fabrics. This eliminates the dirt on which viruses, bacteria, and moulds can proliferate. It is suitable to sanitize and protect sofas, chairs, curtains, rugs, clothing, and masks. We recommend its use in public places with great footfall such as hotels, restaurants, bars, cinemas, nursing homes, and schools. Can be used in conjunction with Hydrise.

How to Use
Spray the product evenly over the entire surface to be sanitized at a distance of at least 20 cm, without excess, and let it dry for 15 minutes. It is not necessary to dilute the product or rinse; we recommend carrying out a preliminary test before use.

Technical characteristics

  • Hydroalcoholic sanitizing spray for surfaces.
  • Quick and deep action.
  • Ideal for the frequent sanitation of all materials, even in the absence of water.
  • Suitable to sanitize all types of alcohol-resistant surfaces.
  • Ideal to sanitize materials that cannot be sanitized with hypochlorite-based products.
  • Ethanol content ≥ 75% BY WEIGHT (in compliance with the requirements of the Ministry of Health note no. 5443 dated 22 February 2020).

Hydrise: double sanitizing and water-repellent action.

Hydrise is a dual-action product for fabrics: sanitizing and water-repellent, with a colorless alcohol concentration over 70%. It is suitable to sanitize and protect sofas, chairs, curtains, rugs, clothing, and masks from the proliferation of viruses, bacteria, and moulds. We recommend its use in public places with great footfall such as hotels, restaurants, bars, cinemas, nursing homes, and schools. We recommend to use the Sanirise sanitizing product with it for the subsequent 5/10 ordinary sanitizing operations before proceeding with a new application of Hydrise. In the case of washing in water, we recommend repeating the application of Hydrise after 4/5 washes.

How to Use
Remove dirt residues from the surface to be treated, spray the product evenly at a distance of at least 20 cm, without excess, let it dry for 15 minutes. Cross-linking of the water-repellent element will be complete after 12 hours. It is not necessary to dilute the product or rinse; we recommend carrying out a preliminary test before use.

Technical characteristics

  • Double action: sanitizing cleaning and water protection.
  • Deep protection thanks to the formulation based on nanopolymers in hydro-alcoholic solution.
  • Suitable for all types of natural fabrics and for all major synthetic fabrics.
  • Ideal to sanitize and protect indoor and garden sofas and upholstery in general.
  • It does not leave dangerous residues after drying.
  • Protective action resistant to multiple washing cycles.
  • It passes air permeability tests, bacterial filtration tests, tests on the degree of hydro-repellence/drop shape and sanitation performed in compliance with current regulations. Certificates available upon request.
  • Ready-to-use product, it does not require dilution or rinsing.
  • Alcohol content ≥ 70% BY WEIGHT (in compliance with the requirements of the Ministry of Health note no. 5443 dated 22 February 2020).

Renew: completely regenerates and renews the surfaces of fabric in a few minutes.

Renew regenerates and renews surfaces in leather, eco-leather, and synthetic materials that have been ruined by and are opaque from the action of time and UV rays. It gives water repellency and protection and renews the brilliance and luster of the surfaces. Renew is easy to use: just pour a small amount of product on a cotton or microfiber cloth and apply evenly to the surface after removing any residue of dust or dirt. At this point, just wait for it to dry completely (approx. 15-20 minutes) before using the surface on which the product has been applied. Renew can be reapplied as needed without the need to remove any residues from the previous application. With 1/2 liter of Renew you can completely regenerate up to 10 square meters of upholstery.

How to Use
Clean the surface from dust or dirt. Pour a little product onto a cotton or microfiber cloth and apply evenly, gently rubbing the surface to facilitate absorption. Repeat the application at least once a year or as needed.

Technical characteristics

  • Protective and regenerative action.
  • Physical state: thick, colorless, and odorless liquid.
  • Reactivity with other substances: absent under normal conditions of use.
  • It does not contain substances classified as hazardous to health or the environment pursuant to the provisions of Regulation (EU) 1272/2008 (CLP) (and subsequent amendments) in quantities such as to require notice.

SLF20: your best choice for deep cleaning against oxidizing stains.

SLF20 is one of the new Flukso detergents designed to clean surfaces in leather, eco-leather, and synthetic fabric such as sofa and armchair upholstery, coverings for other furniture, car interiors, etc. The delicate raw materials inside it perform a solubilizing and emulsifying action. Easy to use, this detergent has a pH that is perfectly compatible with both leather and fabric surfaces and combines the action of surfactants with the whitening action of hydrogen peroxide, effective against oxidizable stains (tea, coffee, tomato). In this way, you can easily remove various types of dirt without damaging the surfaces treated.

How to Use
Spray a moderate amount of product evenly over the entire surface to be cleaned, at a distance of at least 20 cm, making sure you do not soak the fabric, then wipe with a soft cloth until the product is completely dissolved. It is not necessary to dilute the product or rinse; we recommend carrying out a preliminary test before use.

Technical characteristics

  • Physical aspect: liquid, colorless/straw yellow.
  • Chemical stability: not less than six months under normal conditions.
  • Storage temperature: between 5°C and 35°C.
  • Incompatibility: none under the conditions of use.
  • Specific weight 20° C: 1 kg/l ca.
  • pH: ~ 5.5.
  • Ingredients compliant with Reg. (EC) 648/2004: <5% non-ionic surfactants, oxygen-based whiteners.

For further information contact us